The VTAF Telfon Upgrade is priced at $36 USD. If the VTAF Teflon
Upgrade is ordered with a VTAF unit, the upgrade will be installed before shipping. If the VTAF Teflon Upgrade is
purchased for installation at home, figure on about 20 minutes for the easy-to-do installation.
The VTAF Teflon
Upgrade provides a thin Teflon dry lubricating and damping layer to the bottom of the VTAF Adjuster Wheel, to the Top
of the VTAF Bronze Bushing, and to the tone arm pedestal extension surfaces contacted by the VTAF Guide Assembly.
The VTAF Teflon Upgrade improves the VTAF by increasing tone arm
isolation from the arm board, adding significantly to the already remarkable sonic benefits of the VTAF.
The Teflon Upgrade Reduces VTAF adjuster wheel friction making VTA Adjustment on the
Fly even smoother and easier.
The VTAF Teflon Upgrade is
easy to install. Estimated down time is 20 minutes. If ordered with the VTAF the Teflon Upgrade will be installed
before shipping.
The VTAF Teflon Upgrade Adds only .010"
to the minimum achievable tone arm pedestal height.
Included in the Kit
Full instructions, self adhesive teflon for the bottom of the VTAF Adjuster
Wheel, self adhesive Teflon for the top of the VTAF Bronze Bushing, self adhesive Teflon disks for VTAF Guide Assembly contact
points, wipes for preparing the metal surfaces to accept the self adhesive Teflon, and a sharp blade for trimming excess Teflon
from the VTAF Bronze Bushing and from the VTAF Adjuster Wheel.
NO RISK GUARANTEE FOR THE VTAF TEFLON UPGRADE KIT
In the unlikely event you are not
fully satisfied, please contact us within 90 days for a no questions refund. Return of a used VTAF Teflon Upgrade Kit is
not required. If the VTAF Teflon Upgrade Kit is unused, return will be appreciated.